Does anyone know where I can find the secondary HIN on a late 1990s Martinique 3600?

Good morning, is there anyone that can tell me where i can get a plumbing and electric schematic for a 1986 Wellcraft coastal with twin inboards?
Thank You

I have a 19' 1995 wellcraft excel and I am having the darnedest time starting it! I thought you needed to prime in a few times but from I understand now, I just need to push the button and left the red handle to move the throttle forward a little and it should turn over but I get nothing!! I thought after you primed it a few times you would bring it back to neutral and start it that way?? what am I doing wrong??

Hi I'm Chris was wondering if anyone could help me decide if a 2002 180 fisherman is the boat for me I'm in Florida and like to fish for trout and reds in the gulf steinhachee area was wondering if 180 fisherman is right for my needs?

I’m looking for someone that can make or somewhere to purchase the 3200 Martinque logos that are on the radar arch. Any help is appreciated!

What type of boating mechanic or specialist should I take my boat to for trapped water underneath my cuddy floor part where you step down into? I've narrowed things down to when I haul the boat around it keeps getting soaked, hasn't been dry in a while! I have 1995 wellcraft excel

Hey guys, I have a 1986 wellcraft Nova XL23 I wanna redo the swim platform as I feel it's very narrow and make one less longer.... The current one is about 78 by 16 looking to do 78x 22 possibly 24.... So my question is what type of wood would you guys go with I know teak is the industry standard however I'm not looking to spend that much whatever would I plan on using will get several coats of a sealer to help protect it I'm not looking for it the last 10 plus years maybe a few seasons is fine and dandy for me. I was leaning more towards pine as it's the cheapest and I found some really good quality cut pieces no knots in the whatsoever....... Also consider using oak however it's seems to be More heavier. Here is the lumber I need

1x4x8....need..3
1x3x8....need..5
1x2x8....need..9

What would you guys recommend

looking to purchase a 1996 218 walkaround wellcraft with a 200 Johnson ocean pro.
with that said does anyone know if the transom and stringers have wood?? has anyone had any issues with this year boat?? any info will help.
Thanks Benny

2006 Wellcraft coastal 290 (although I think most years will be the same)

Im looking to remove the oval trim that's almost like a flat armrest alongside the helm seat and passengers seat

It appears to be on hidden clips but i can't work out if it is push style plugs like automotive or if it's on like low profile hooks

Any help on how they remove would be greatly appreciated

I have run the boat from an external fuel tank to determine if I have a tank/fuel system issue. I do. A few questions about the fuel tank/system. Can the fuel pickup be removed? Is there a screen at the end of the pickup that may be plugged? There are two fuel pickups. I have checked for an anti syphon valve in the pickup that feeds the fuel water separator, and there is none. I replaced the very corroded tank vent and that did help a lot. The symptom is that the boat decelerates (when at running speed) after 30 seconds to a minute. This does not occur when running from an external tank. What other items in the fuel tank could cause this behavior? I have checked for water via the separator, and it looks clean. I have heard that there could be sediment in the tank that is sloshing around and prevents full flow to the pickup. Any information on how to fix this problem would be appreciated.

tomkaz