Hello,

Happy owner of a new to me 1989 Fisherman 20. Been spending the 2 past weeks cutting through the many years of neglect that has resulted in some terrible oxidation. Almost finished wet sanding/compounding/polishing/waxing the hull. Its looking fantastic. Next is re-wiring the entire boat. Looking forward to chatting with the folks on this forum.

Afternoon folks....Can anyone tell me if they are familiar withe these components? I'm having a terrible time replacing them and am unsure of a part number, name or description. The best I can offer is that they are specific to the port and starboard sides of the boat and look as shown below. Thanks so much in advance!

I need the stainless fasteners that I am attached pics .

I am looking for the stainless fasteners I have attached pics.

Hello,

Happy owner of a new to me 1999 Fisherman 180. Been spending the past week trying to cut through the many years of neglect that has resulted in some terrible oxidation. Almost finished wet sanding/compounding/polishing/waxing the hull. Its looking fantastic. Next bit of work is doing the same to the inside. Looking forward to chatting with the folks on this forum.

1995 Wellcraft ECLIPSE 232
Searching high and low for a replacement hinged windshield door for a 1995 wellcraft eclipse 232. Anyone know of a 1995 Wellcraft ECLIPSE 232 being parted out? Thanks!

Hi All. Wondering if anyone else has experienced what we are seeing...We bought a new 2017 Wellcraft 241 Fisherman in 2018. We are the first owner and purchased with 40 hours on her. At time of purchase, dealer pointed out that there was a small crack in the subfloor (where the porta-potty is located) - in a corner - about an inch long. They had their mechanics take a look and said it should not be an issue. We have thoroughly enjoyed our boat - and live in Tampa, FL. As we put her in for 100 hour service a month or so ago - we noticed the crack had gotten much larger (about 3-4 inches) and appeared to be separating a little. So the marina repaired the crack while they had her for service. We picked up the boat and drove the 40 miles home on the water only to discover a brand NEW crack had developed just behind where they had made the original repair - still in the subfloor - not external. This was last weekend. We contact the marina again - they tell us they will contact Wellcraft. Took the boat out this weekend - low and behold ANOTHER crack shows up - this one is larger about 3-4 inches. It doesn't appear to be taking on water as the bilge pump doesn't fire very often, but is disconcerting to say the least.

Has anybody else had this happen?

Anyone know where I can get a service manual for a 1997 eclipse 2000 5.7?
Thank you

Kids used the boat and had it in gear in trailer mode, then said it made a loud noise. What could be messed up?
1997 wellcraft eclipse 2000 5.7

Hi all, we are looking for the wiring schematics of the wellcraft 26se. hopefully you have the flow chart. thank you in advance