Hello, new to this site. Been boating for many years and currently own a 26 se.

I'm new to this forum and this is my 2nd season with our 1987 250 sportsman O/B repowered with 250 Yamaha 1998.
We've got water in the enclosed head area. The portable toilet is not leaking. We also have a rust stain on that same side of the boat that runs to the scupper. I'm wishing to find some manuals with wiring schematics & general info that will also show us what we are looking at and how to cipher out how the boat is built.

Any leads on sources for support manuals would be very much appreciated.

Happy Boater!

Hello and thanks to anyone who can help me! My name is Joe I just purchased a 1995 Martinique 3600. Hose from the bilge pump between motors went behind the generator and was not connected to anything, I cannot find the outlet. Need all the help I can get. Thanks, Joe

Hi All,
Need some hull information if possible. Since buying the boat a couple years ago I noticed the bow always sits heavy. The engineer did a full boat inspection and did not find any major issues with the boat just stuff he recommended to make better.

The boat is in the water all summer from June to October then on a trailer with shrink wrap the rest of the time.
Last week we spun a hub on the prop. As we traveled in to the dock noticed the bow real heavy. Looked in the cabin at the dock had 5-6 inches of water in it. I then found out my bilge pump had issues (murphy's Law) and was not working on automatic or manual. We fixed that problem but I am concerned about the water in the bow? And how and why it went forward.

So I need a few answers and hope someone here can point me in the right direction.
1. The bow is completely sealed. Does anyone know if the bow is filled with foam? And if so is it a water proof foam or will it retain water?
2.The hull appeared to be in good condition when I purchased the boat. Before painting the bottom I always inspect and have found no issues. I only have 1 thru hull fitting for the wash down and bait well. That area is completely dry. There are a couple of transom mounts for the fish finders. Anyone have any ideas what to check and how to do it?

If anyone can recommend a reputable boat (hull) mechanic please let me know.

Thanks for any information

Don

Hi All,

New member from LI, NY. Hoping to get some information on a Wellcraft coastal.

Thanks
Don

Hey guys, I have a 1982 Wellcraft 255 Aft-Cabin that I just started having an issue with connecting to shore power. The reverse polarity light is on. I have tried a different slip with shore power as well as trying different shore cables from good known working boats and shore boxes. When the light is on I cannot even flip the breaker over- I can push it but it just returns back to the tripped location. I am thinking possible issue with the main breaker? The main breaker has what looks like 3 individual breakers together. Any help on what to check would be appreciated- I am more familiar with 12V systems so I didnt want to start probing without a diagram.

Thanks for any help!

Hi all...hoping you can help me make an almost perfect WC Coastal 28 just a little better! Looking forward to figuring it out... - Bill

Hi, I'm Dan from Buffalo N.Y. Just bought a 1989 wellcraft Aruba! It needs a little work, so I hope I can find some good ideas on this site! Thanks.

Can anyone tell me where the A/C return vent is located on the 290 coastal?

We recently purchased a 2003 290 coastal. We upgraded from a 21' center console. The coastal is an awesome boat and our family is really enjoying our time on it. Our home port is Point Pleasant New Jersey.