Welcome to Wellcraft Boats Owners Forum
We are a boating forum for owners of Wellcraft Boats to enthusiastically discuss all aspects of Wellcraft Boat ownership. Whether you are looking for your first Wellcraft or currently own one, you are sure to feel at home on WellcraftBoatOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
1983 Scarab outdrives
-
kilgoreind@yahoo.com
Topic author - Posts: 1
- Joined: Fri Mar 08, 2024 6:12 pm
- Vessel Info: 1983 Wellcraft Scarab 377
1983 Scarab outdrives
Thx
Steve
-
DaveKamp
- Posts: 28
- Joined: Wed Jul 31, 2024 11:53 pm
- Vessel Info: 1979 SunCruiser 255, 1998 MerCruiser 5.7L L31
- Been thanked: 5 times
Re: 1983 Scarab outdrives
The TRS used an engine-mounted transmission, the lower unit had no internal shifting, just stout guts and gears.
The TRS was a 'sport' version of the TR... it was common back then for the TR drive series to be on big cruisers, houseboats, and workboats, with up to a 20" diameter prop. The 'sport' flavor TRS had a more hydrodynamically amicable lower, swung a smaller prop at higher speed. The #2 SpeedMaster was intended for 'ultra-high-speed' performance... offshore racing.
The TR series was succeeded by the Bravo, which was a little smaller, and had it's own internal shifting. Not quite as strong as the TR system, but certainly proven a good performer.
There WAS a short time when the MerCruiser Alpha was available behind a mild 454. They were mostly painted white, and all had 1.34:1 gear ratios... which... if one were industrious, could fit the same ratio system in any OTHER R-1R-Alpha-Alpha One- Alpha One SS, but you'd hafta have something speed-hungry to warrant it... and of course, keep the RPM below 4900, as they'd happily melt the upper gears quick if you overspun 'em.
Return to “Engines, Transmissions & Drives”
Who is online
Users browsing this forum: No registered users and 2 guests
