New Member with 95 Excel 19 SX
Posted: Sun Apr 28, 2019 9:27 am
Hey Wellcraft Owners,
I've been a long time bayliner owner, but recently retired that ol 86 17.5' Capri Bowrider with my now 1995 Excel 19 SX Bowrider Inboard/Outboard 3.0L Mercruiser Alpha One Outdrive, Seawater use in Virginia Beach, VA. 3rd Owner with unknown hours (estimated at 450h).
My Job list so far is:
Re-Name the Boat (its now called the "Current Obsession" and I am not a fan of it lol)
New Prop (had a spun stock prop that I changed out to a much larger Quicksilver Mirage SS Prop 48 13704 A41 23P)
New Audio (replacing the AM/FM cassette deck with a 320W Marine Pyle Unit and 4 new 80w RMS Marine Speakers)
Waketower (has nothing on it now and either going to fab one myself or get a kit like Monster Tower or something similar)
Fuel Gauge (Currently doesn't read so either re-wire it or replace the sending unit)
Tachometer Gauge (Just need to re-run the wire from the Distributer to the Dash)
Re-Wire Main Components (Seems to have corroded wires from salt environment so will be Installing a Dual Battery Switch, New cables to battery, starter, alternator, tilt/trim all with new groundings)
Title/Register Boat and Trailer (have Title from original owner on both, but only Bill of Sale from 2nd owner)
Figure out how to make a Signature line here
Should be Fun!!!
I've been a long time bayliner owner, but recently retired that ol 86 17.5' Capri Bowrider with my now 1995 Excel 19 SX Bowrider Inboard/Outboard 3.0L Mercruiser Alpha One Outdrive, Seawater use in Virginia Beach, VA. 3rd Owner with unknown hours (estimated at 450h).
My Job list so far is:
Re-Name the Boat (its now called the "Current Obsession" and I am not a fan of it lol)
New Prop (had a spun stock prop that I changed out to a much larger Quicksilver Mirage SS Prop 48 13704 A41 23P)
New Audio (replacing the AM/FM cassette deck with a 320W Marine Pyle Unit and 4 new 80w RMS Marine Speakers)
Waketower (has nothing on it now and either going to fab one myself or get a kit like Monster Tower or something similar)
Fuel Gauge (Currently doesn't read so either re-wire it or replace the sending unit)
Tachometer Gauge (Just need to re-run the wire from the Distributer to the Dash)
Re-Wire Main Components (Seems to have corroded wires from salt environment so will be Installing a Dual Battery Switch, New cables to battery, starter, alternator, tilt/trim all with new groundings)
Title/Register Boat and Trailer (have Title from original owner on both, but only Bill of Sale from 2nd owner)
Figure out how to make a Signature line here
Should be Fun!!!