190ccf soft floor

[garlandp]

Hey. I am new to the forum and need some assistance for the repair of my 190ccf. For clarification it is a walkaround, center console with all finished fiberglass interior. The floor is soft from the CC to the aft wall of the interior. I have drilled some small holes in the floor, it is waterlogged and wood is rotten. Thoought about cutting out the finished flooring but decided that there may be a better way. I have removed the rubrail to see if there may be a way of removing the Cap but the cap seems to be firmly adhered to the transum. No luck there. Has anyone had this problem or could make suggestions on where to start with the repair??

[mikem8560]

in not experienced but on other brand forums seacraft people would cut the outer layer exposibf the wood core all rotton the dig it out cut new wood and fill the void and pour epoxie in weight the wood down to dry then epoxie the cut outer layer back down and fill the cut damaged

[garlandp]

I was hoping to retain the origional finish of the flooring. fiberglass with skidproof dimond patern. Do you thnk that the only way to repair it is to cut into the top of the boat flooring. I thought that their may be a way to remove the cap/liner and repair form the inside.