Welcome to Wellcraft Boats Owners Forum

We are a boating forum for owners of Wellcraft Boats to enthusiastically discuss all aspects of Wellcraft Boat ownership. Whether you are looking for your first Wellcraft or currently own one, you are sure to feel at home on WellcraftBoatOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Hole in bow & cabin bed parts

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply

Topic author
Shoriggin
Posts: 2
Joined: Sat Oct 24, 2020 8:12 pm
Vessel Info: 1996 Wellcraft 238 Coastal
2005 Evinrude Direct Injection motor

Hole in bow & cabin bed parts

Postby Shoriggin » Sat Oct 24, 2020 8:36 pm

Hi! I'm a first time owner of a Wellcraft. I just purchased a 1996 238 Coastal.
I have a couple of questions.
1) there is a hole through the hull right by the bow eye on the port side of boat. It is about 1/2" in diameter. Previous owner said that it was a drain for the anchor locker. Is this accurate? If so, why doesn't it have a thru-hull fitting instead of just a drilled hole?
2) does any have a picture of what the components look like that form the bed in the galley? Mine is missing the couple of pieces that cover the center floor area. I don't know how big they should be or how much of the cabin they cover.
Thanks!
Larry
You do not have the required permissions to view the files attached to this post.
Top


goodday
Posts: 226
Joined: Sun Aug 10, 2014 9:15 pm
Vessel Info: 1999 2600 Mart. 5.7 bravo3
Location: Wauseon Oh,
Has thanked: 25 times
Been thanked: 35 times

Re: Hole in bow & cabin bed parts

Postby goodday » Sat Oct 24, 2020 9:17 pm

Hole looks right but maybe missing outer part, looks like it has treads on inside pc
Top

Topic author
Shoriggin
Posts: 2
Joined: Sat Oct 24, 2020 8:12 pm
Vessel Info: 1996 Wellcraft 238 Coastal
2005 Evinrude Direct Injection motor

Re: Hole in bow & cabin bed parts

Postby Shoriggin » Sat Oct 24, 2020 9:31 pm

goodday wrote:Hole looks right but maybe missing outer part, looks like it has treads on inside pc

Thanks!
Top

LMK
Posts: 137
Joined: Thu Sep 05, 2019 11:30 am
Vessel Info: 2003 270 Coastal
Twin 225 Yamaha
Location: Darien, Ga.
Has thanked: 9 times
Been thanked: 24 times

Re: Hole in bow & cabin bed parts

Postby LMK » Tue Oct 27, 2020 2:09 pm

I think the hole is for the anchor locker. It should have a fitting in it which has a clam shell that only allows water to go out but not in from the front.
Top
Post Reply

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 2 guests