Welcome to Wellcraft Boats Owners Forum

We are a boating forum for owners of Wellcraft Boats to enthusiastically discuss all aspects of Wellcraft Boat ownership. Whether you are looking for your first Wellcraft or currently own one, you are sure to feel at home on WellcraftBoatOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Need a replacement power trim/tilt pump assembly

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.
Post Reply

Topic author
rolerbe
Posts: 6
Joined: Tue Aug 18, 2020 11:58 am
Vessel Info: 1998 Eclipse 2000 SC

Need a replacement power trim/tilt pump assembly

Postby rolerbe » Tue Aug 18, 2020 12:07 pm

Motor runs, but case is cracked and loses fluid. I would most like to replace the whole unit with a direct replacement. Searching for part numbers to find a replacement. Does anyone have info on what the unit is? Thanks.
Top

User avatar

CptBill
Posts: 766
Joined: Fri Sep 07, 2018 6:37 am
Vessel Info: Jester Toy
2002 270 Coastal, Twin Yamaha 4 stroke 250
330Larson Cabrio twin 5.7l EFI V.P duo props
2760 Regal commodore
40' pacemaker flush deck
2855 Bayliner, 25' Marathon aft cabin
Location: Hudson Fl
Has thanked: 38 times
Been thanked: 133 times

Re: Need a replacement power trim/tilt pump assembly

Postby CptBill » Tue Aug 18, 2020 3:40 pm

Chances are it's ether Bennett or Lenco
Never Ever Ever do anything that test your wife's memory :captain:
Top

Topic author
rolerbe
Posts: 6
Joined: Tue Aug 18, 2020 11:58 am
Vessel Info: 1998 Eclipse 2000 SC

Re: Need a replacement power trim/tilt pump assembly

Postby rolerbe » Tue Aug 18, 2020 4:53 pm

I'll have to crawl down in (now that it's not pouring rain) and see if I can find some nameplate data. Will post it if I find it. Thanks.
Top

Bt Doctur
Posts: 73
Joined: Mon Aug 12, 2019 6:02 pm
Vessel Info: in between vessels
Has thanked: 1 time
Been thanked: 13 times

Re: Need a replacement power trim/tilt pump assembly

Postby Bt Doctur » Wed Aug 19, 2020 11:34 pm

Power trim/tilt is usually for the drive , mercruiser plastic bottom is available .
Trim tabs or trim planes are used to level a boat when under way usually Bennet , Lenco are electric
Top
Post Reply

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 16 guests