Welcome to Wellcraft Boats Owners Forum

We are a boating forum for owners of Wellcraft Boats to enthusiastically discuss all aspects of Wellcraft Boat ownership. Whether you are looking for your first Wellcraft or currently own one, you are sure to feel at home on WellcraftBoatOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

Deck Replacement

Anything related to the operation of your boat. Steering, Bilge Pumps, thru-hulls, bottom paint, etc.

Topic author
Blackcloud
Posts: 2
Joined: Mon Jul 14, 2014 6:31 pm
Vessel Info: 1989 Wellcraft 215 Eclipse

Deck Replacement

Postby Blackcloud » Sun Mar 29, 2015 9:50 pm

I have a 1989 215 Eclipse and the floor is rotted. I need to replace the decking and repair any damaged stringers. Does anyone have experience with this or maybe some ideas were I can get some information on how to go about repairing it.

Blackcloud


goodday
Posts: 226
Joined: Sun Aug 10, 2014 9:15 pm
Vessel Info: 1999 2600 Mart. 5.7 bravo3
Location: Wauseon Oh,
Has thanked: 25 times
Been thanked: 35 times

Re: Deck Replacement

Postby goodday » Sun Mar 29, 2015 11:17 pm

ck.out [ boat stringer replacement ] on line, need to learn fiberglass,maybe you can patch in bad spots, carpeted?

Topic author
Blackcloud
Posts: 2
Joined: Mon Jul 14, 2014 6:31 pm
Vessel Info: 1989 Wellcraft 215 Eclipse

Re: Deck Replacement

Postby Blackcloud » Mon Mar 30, 2015 9:35 pm

Thanks, I have done some fiber glass work. That's not my concern. Its more like how to reattach the flooring to the hull correctly. I have not removed the carpet yet but my deck is pretty soft all over. I don't think there is much to save. I will check out your suggestion on line. Thanks

goodday
Posts: 226
Joined: Sun Aug 10, 2014 9:15 pm
Vessel Info: 1999 2600 Mart. 5.7 bravo3
Location: Wauseon Oh,
Has thanked: 25 times
Been thanked: 35 times

Re: Deck Replacement

Postby goodday » Wed Apr 01, 2015 11:05 pm

I had a 20 ft cuddy,same vintage, It was only 10 yrs old, but had floor as you describe, I removed carpet and shallow cut about 1 1/2 in from edge of boat, you prob. have a layer of fiberglass on top of floor board, I removed board from my step dn. to cuddy back to mtr. compartment frt. edge, that got my bad out, being soft it comes out easy,you can see whats next then, I used 2 4x8 sheets of 3/4 exterior sign bd., I was able to slid fit frt. board and rear sheet to fit somehow?support your seams, have to sand or grind board finish off where resin/glass is used,6 in., that saved from laying up whole floor, carpeted, just a sugg. it worked for me, or take to pro.

Return to “General Repairs & Maintenance”



Who is online

Users browsing this forum: No registered users and 2 guests