Welcome to Wellcraft Boats Owners Forum

We are a boating forum for owners of Wellcraft Boats to enthusiastically discuss all aspects of Wellcraft Boat ownership. Whether you are looking for your first Wellcraft or currently own one, you are sure to feel at home on WellcraftBoatOwners.com

You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

  • Global announcements
    Replies
    Views
    Last post

  • Latest news

View the latest post Attachment(s) Re-Painting Yamaha Outboard Motor - Cowling and Lower Unit


My Yamaha 250 Z250TURC - 2 Stroke Paint job was looking faded and worn out. Paint chips and years of use, had me thinking it was time to repaint it.

This is not an easy project, so make sure you have the tools and SPACE to tackle this. In my case, having my wife let me use the garage for a paint booth was it's own challenge, lol.

I went online and found the Outboard Paint shop and ordered the Yamaha Paint Kit for my Engine. The kit included he base coat and hardener, and the clear and hardener. I also ordered the following separately.

Acme 2k primer 1 quart
Alumiprep
Alodine 1201
Primer Sealer Can

The cowling is fiberglass, so typical automotive paint prep would apply here. However the lower unit is submerged in the water so more steps and preparation are involved. Your paint job is only as quality as the prep work you put into it.

I spent several days striping the decals off the cowling and chemical stripers to remove the factory paint down to the fiberglass. I had too many chips on the paint all over before, so going to base was my decision. The midsection cannot be removed so you have to prep separately. This is made from Aluminum. You want to remove the trim switch, rubber grommets and in my case, I removed the SeaStar steering cylinder. I wanted to reseal this, and it was in the way for a paint gun. With all of the removable parts removed, I scuffed the midsection with 150 grit sandpaper, so the primer would have something to grip to and make a good chemical bond.

With the lower unit, I removed the propeller, the water intake plastic parts, the midsection apron, and loosened the bolts on the lower unit to drop it slightly so when I paint it, it would not be painted stuck together. No good for replacing the water pump in the future. I removed the red pin stripe (ugly) and scuffed with 150 grit sandpaper, sanded again with 220 grit, and 320 grit...all parts and pieces.

The areas you have exposed aluminum, you need to saturate with alumiprep and rinse, then alodine 1201 to seal the aluminum. Skipping this step will ensure you get future corrosion. Especially in salt water! Once everything was sanded to satisfaction, I used a wax grease remover to remove the fine particulates.

TAPE EVERYTHING OFF!

PAINT BOOTH: This part can be tricky. Sure you can paint in a parking lot/driveway. Depending on the time of year, you'll be picking bugs out of your paint, pollen landing in undried paint, rain, etc. I backed my boat engine partially into the garage, and with some plastic from Harbor Freight erected a make shift paint both.

PRIMER COAT: With my 2k primer, I painted 3 coats for good coverage (Cowling, Mid Section, Lower Unit, - let flash 10 minute in between and then sanded with 400 grit

PRIMER SEALER: Using a Primer sealer in a can, Sealed all of my primer work sanded with 600 - wax grease remover

BASE COAT: Mixed base, and hardener- Yamaha Metallic Grey - 3 Good coats - let flash for 10 minutes.

CLEAR COAT: Mix with hardener - 2-3 coats - 10 minutes to flash between. Wait 2 hours and remove the tape.

You can polish and orange peel or fish eye after about 3 days. You can add a coat of wax after 30 days.

This was my method and there are a lot more details, but generally a guideline of what I did.

I haven't ordered decals yet, because I want to do something CUSTOM and make look unique. But you can get factory details if you prefer the stock look!

before.jpg
WP_20160307_16_22_41_Pro_LI.jpg
WP_20160307_16_22_48_Pro_LI.jpg
WP_20160307_16_26_00_Pro.jpg
Untouched Side.jpg
WP_20160308_17_39_18_Pro.jpg
WP_20160309_17_48_45_Pro_LI.jpg
WP_20160309_21_24_34_Pro_LI.jpg
WP_20160310_20_44_50_Pro_LI.jpg
WP_20160310_20_44_57_Pro (2).jpg
WP_20160310_20_44_57_Pro.jpg
WP_20160310_20_45_13_Pro_LI.jpg
WP_20160310_20_48_41_Pro_LI.jpg
WP_20160330_18_27_30_Pro_LI.jpg
WP_20160401_12_13_37_Pro_LI.jpg
WP_20160401_12_14_22_Pro_LI.jpg

Views: 6277  •  Comments: 0  •  Write comments [ Back ]

  • The Sand Bar
    It's time to kick back with a cool one at the Sand Bar and talk about something else for a while! This forum is for all non-boating related discussions. NO POLITICS! The general forum rules apply, so don't co crazy :-)
    11 Topics
    37 Posts
    Last post Re: NFL Playoffs
    by willy View the latest post
    Fri Jan 13, 2023 7:39 am



  •  Newest members

  •  Top Posters

  •  Statistics
  • Totals
    Total posts 5735
    Total topics 2083
    Total Announcements: 0
    Total Stickies: 0
    Total Attachments: 1136

    Topics per day: 0
    Posts per day: 1
    Users per day: 1
    Topics per user: 0
    Posts per user: 1
    Posts per topic: 3

    Total members 5080
    Our newest member matthewmiller

  •  Who is online?
  • In total there are 183 users online :: 2 registered, 0 hidden and 181 guests

    Registered users: Google [Bot], Google Adsense [Bot]


  •  Sponsors

  •  Link to us
  • Please feel free to link to Wellcraft Boat Owners Forum. Use the following HTML:



  •  Clock