Hey. I am new to the forum and need some assistance for the repair of my 190ccf. For clarification it is a walkaround, center console with all finished fiberglass interior. The floor is soft from the CC to the aft wall of the interior. I have drilled some small holes in the floor, it is waterlogged and wood is rotten. Thoought about cutting out the finished flooring but decided that there may be a better way. I have removed the rubrail to see if there may be a way of removing the Cap but the cap seems to be firmly adhered to the transum. No luck there. Has anyone had this problem or could make suggestions on where to start with the repair??

Hey I have a 2000 welcraft Martinique. The other day my neutral button didn't disengage and my engine would not start. I opened the casing on my stern drive and was able to get the button back out. Now it works but my engine will not engage. It seems as if its stuck in neutral. Any advice on how to proceed?

Hello I have a 2005 Coastal 252 and some of the fabric inside the cabin needs replacing, it is a lemom color with a patern of coconut trees. Does anyone know if it is still available and if so where can I purchase it?

I have a 1986 St Tropez and need to know what size of cotter pin to use in the prop shaft.

does anyone know where fresh waterpump is locatedon 3700 martinique

Joined the WBO last year but never dropped in to say hi. I'm the proud owner of a '97 3600 Martinique. Her name is Shore Leave in honor of the 22 1/2 years I spent in the world's GREATEST Navy. She's powered by twin Merc Bluewater 7.4's through ZF 630V's to Michigan Wheel 17 x 16's. A Kohler 6.5CZ provides all the power she needs when moored. She's not perfect, who is, but in good shape. My wife calls her our "Waterfront Condo" and we spend as much time on her as possible, which is a lot, when I'm not running the power plant I work at.
Looking forward to a lot of years cruising the LI Sound and neighboring rivers.

The boat I just bought has a High Five prop on it and the research I've done says that it should be used on higher HP motors than what is in this boat, Any opinions? (there's an open door if I've ever seen one, lol) Also, looking for some Wellcraft and Mercruiser decals, I know most of what is out there is cheap reproduction, any good decal dealers you people might know of?

Hello everyone! I'm a proud new owner of a 1988 Wellcraft 170 Classic, 3.0. Boat was a bit dirty but not in bad shape. Wife and I have spent the last week scrubbing on it and it's looking pretty good!

Hope someone here can help. I have a '97 3600 Martinique and my wife and I filled up the fresh water tank for the first time this year so that we could flush and sanitize the tank and system. We opened the faucets and waited for the water to come out and waited. No water! She happened to look over the side and said we must be getting water out of a faucet because water is coming out the side. I looked and immediately knew it was coming from the forward bilge. I pulled out the aft bed and opened the bilge cover and sure enough there was water. Does anyone know how to access the fresh water tank. My wife called a local Wellcraft dealer but none of the people knew anything about this model and she, myself and a friend have not been able to find any information on the internet.

Can someone please help? I'm now carrying 5 gal. water jugs for drinking, cooking, washing and pouring in the vacuflush and they're darn inconvenient.

Hi All,
Brand new here and am looking at purchasing my second Wellcraft. Had a 232 Excalibur a few years ago and am now looking at a 1999 270 coastal. Can anyone tell me if the transom and stringers are composite or if they are glass wrapped wood?
The boat is powered by a pair of Merc 200 opti's with 340 hours and other than a few loose screws and a couple of lights, everything seems to work well and be pretty tight. A little elbow grease and polishing and she'll be beautiful again as she should be!
Any advice would be hugely appreciated!
Thank you from Michigan!
Doug