Welcome to Wellcraft Boats Owners Forum
We are a boating forum for owners of Wellcraft Boats to enthusiastically discuss all aspects of Wellcraft Boat ownership. Whether you are looking for your first Wellcraft or currently own one, you are sure to feel at home on WellcraftBoatOwners.com
You are currently viewing our board as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have access to searching the forum topics, post topics, communicate privately with other members (PM), respond to polls, upload your own photos and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Bilge pump location
-
No Reason
Topic author - Posts: 2
- Joined: Mon Jun 01, 2015 6:40 pm
- Vessel Info: 2000 Wellcraft 24 Walkaround
Bilge pump location
-
Chris
- Posts: 23
- Joined: Wed Mar 18, 2015 12:01 pm
- Vessel Info: '96 23 Excel WA. 200 HP Mercury Offshore XL with a re-manufactured powerhead (2013).
- Has thanked: 2 times
- Been thanked: 10 times
Re: Bilge pump location
On MY W/A, the forward bilge is located just rear of the forward bulkhead. In order to access the bilge I have to be in the cabin looking aft. There is a hatch located near the floor toward the bottom of the bulkhead. Upon opening the hatch I get access to my forward bilge. Good luck.
Chris
-
No Reason
Topic author - Posts: 2
- Joined: Mon Jun 01, 2015 6:40 pm
- Vessel Info: 2000 Wellcraft 24 Walkaround
Re: Bilge pump location
-
Chris
- Posts: 23
- Joined: Wed Mar 18, 2015 12:01 pm
- Vessel Info: '96 23 Excel WA. 200 HP Mercury Offshore XL with a re-manufactured powerhead (2013).
- Has thanked: 2 times
- Been thanked: 10 times
Re: Bilge pump location
On my boat, when it rains, the rain comes in through the small hatch over the cabin door. There is a piano hinge connecting two horizontal laying plexi pieces that is supposed to be waterproofed by a piece of reinforced rubber. The rubber has worn through and now the rain comes in and wets the carpet right by the hatch that leads to the bilge. I'm currently looking for a replacement piece of reinforced rubber.
The auto switch for my bilge was of the type where the DC wires were directly connected to the actuator which means if the wires are hung up, the switch won't activate properly. I switched mine out.
If you find water coming into the cabin, and your hull is in good shape then check the seam where the deck meets the hull. I've heard of several Wellcraft where the seam separates.
First thing I'd check would be both the auto and manual functionality of the forward bilge. Water from the bilge should be under an inch of so deep when the bilge has just finished cycling.
Good luck and let us know what you find.
-
cliffdweller
- Posts: 7
- Joined: Sat Jul 19, 2014 9:07 pm
- Vessel Info: 2000 22 wellcraft walkaround, 200 2014 etec
Re: Bilge pump location
-
Fishin Off
- Posts: 3
- Joined: Tue May 26, 2015 10:59 am
- Vessel Info: 2000 Marinique 2600
Re: Bilge pump location
-
Crackers
- Posts: 1
- Joined: Mon Jun 29, 2015 10:48 am
- Vessel Info: 1999 2600 Martineque 7.4 Gi Volvo Penta DP
- Been thanked: 2 times
Re: Bilge pump location
And you will see the cover.
Return to “Wellcraft Boats Forum”
Who is online
Users browsing this forum: No registered users and 1 guest
